Tech/maintenance Buffet SA 18-20, Dynaction screw in resonators

Seventharrow

New Member
Messages
3
Location
New England
I’m currently restoring two Buffet horns, a tenor and a baritone. They have the screw in resonators but not across the whole horns.

Does anyone have the spuds, screws and resonators available? Please let me know, I’d very much appreciate it. Thanks.
 
I not familiar with the buffet system. I have a sax from the 20's with a similar system. I think a reflector/resonator should have a flat surface. No rivets, screws .... that moisture ..... can "crawl under". Gold(plated), silver(plated), solid nickel silver, brass ..... are best. Less plating problems. Im not sure if the reflectors/resonators on my sax were meant to reflect the tone or just to hold in the pads? If you want to keep your saxes in original , or close to original, you should try to make or buy similar reflectors/resonators, washers. New screws can be bought. You can also install ordinary pads/reflectors that are glued in the keycups. It's your saxes and decision.
 
Paul Carrington made a domed screw in reso for my SDA as one was missing.
He may well be able to make all your missing parts.
Give him a call?
The buffet "screw in resonators" screw into the threaded spud soldered in the middle of the key cup as opposed to the screw threading into the back of the resonator. These can be fabricated and then soldered into place - not going to be cheap though.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,073
Messages
578,613
Members
8,133
Latest member
walthang
Back
Top Bottom