Tech/maintenance Buescher True Tone Art Deco alto

saxmad

Member
Messages
110
Location
North Norfolk
The True Tone Art Deco alto I'm working on at present has what appears to be screw-in springs. I've not come across these before so am interested to learn how to change them or how to install stronger springs.
 
The True Tone Art Deco alto I'm working on at present has what appears to be screw-in springs. I've not come across these before so am interested to learn how to change them or how to install stronger springs.

I suggest that before you replace them, get the mechanism straight and clean, and check that the keys move freely. Only then can you evaluate whether you need stronger springs for the mechanism to work properly. These horns can play well with a light action.
 
I suggest that before you replace them, get the mechanism straight and clean, and check that the keys move freely. Only then can you evaluate whether you need stronger springs for the mechanism to work properly. These horns can play well with a light action.
Agreed. In 44 years of playing saxophone I've had to replace a spring fewer than 5 times. For some reason "replace all the springs" has become something people think is needed. It rarely is. If the spring's not broken it almost never needs to be replaced.
 
The True Tone Art Deco alto I'm working on at present has what appears to be screw-in springs. I've not come across these before so am interested to learn how to change them or how to install stronger springs.
No need to change them. Excessive spring tension is usually done to overcome other mechanical faults. All it does is increase mechanical ware. As mentioned above everything fitting proper and being clean the springs will be adequate.
For others who have not had the experience this is what they look like.
1671065325206.webp
 
Agreed the current springs are Nortons. Low C# doesn't quite close despite some pad levelling so I was considering a stronger spring.

Is it possible to replace the Norton spring with a blue needle spring?
 
Agreed the current springs are Nortons. Low C# doesn't quite close despite some pad levelling so I was considering a stronger spring.

Is the mechanism binding or is the pad not quite level? What is preventing it from closing all the way?

Is it possible to replace the Norton spring with a blue needle spring?

Yes. Fabricate a bushing to fill the threaded hole.
 
Make sure the chimmney rim is level. Test the spring action with sax vertical not horizontally. The spring holds the pad closed. Not squashed closed for sealing fit.
The statement that saxmad said “doesn’t close despite some pad leveling” does make one wonder what their idea of pad leveling includes.

@saxmad Are you trying to make the pad level to its cup or level to the tone hole? The answer can be “Both” if, and only if, you first ensure proper alignment of cup to tone hole.
 
The cup itself needs to be flat/level. Then the tone hole/chimney needs to be flat/level. The key needs to be orientated & level to chimney. Then dry fit pad and check everything. The pad needs to be installed flat and level. Then make pad adjustments. It’s just not sticking a glob of shellac on the back of a biscuit, shoving it in and floating to seal. Spring tension maintaining the seal.
7F40A6D5-984C-495A-8D84-B80F2E64E809.webp
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,075
Messages
578,662
Members
8,134
Latest member
banjo
Back
Top Bottom