Tech/maintenance Are Yamaha YAS 280 and Yamaha YTS 280 good enough for professional playing

I seem to remember the SX90R case being similar tatt to the Chinese ones Bauhaus Walsteins come in so a quality shaped case (like a Protec level) will also be well appreciated
 
I have a Yamaha YAS 280 Alto and a Yamaha YTS 280 both regarded as starter Saxes are they good enough for professional use ??

People can easily change the sound of their Yamahas by fitting an after-market neck e.g. the neck from a YAS-62. I tried this by fitting a YTS-62 neck to a YTS-23 and there was a definite sound improvement. Just make sure the octave post is high enough to actuate the loop on the octave key. If not you can always modify it. If I remember correctly, the YAS-280 already has a copy of a YAS-62 neck supplied as standard. I suspect the same is probably true of the YTS-280.

If one day you decide you want a different sax, you may want to keep at least one of your Yamahas as a back-up option - unless money is tight. Murphy's Law requires that your gigging sax is damaged or breaks-down the day before the most important gig of your life. It's nice to have a back-up sax at times like that.

Even if you play your existing Yamaha 280s "as is", they are very good and will do the job nicely. Many professionals have a YAS-23 (or similar) as their back-up sax, or for occasional doubling on. They don't want to spend thousands on a Selmer alto when they play tenor 95% of the time. They're good bangs per buck, particularly if you buy one second-hand.

I remember the first time I played a YAS-23 and YTS-23 and was really surprised at just how quick the action was, and how responsive they were when you blew them. They were very fast and very impressive! I don't know what the newer 280s are like, but I can't imagine they're much different in that respect.

I've gigged with a Yamaha YTS-23 from the 1980s, alongside other players with much more expensive horns (from the usual big-name manufacturers costing around 5 times as much) and yet never got the feeling that I was "outgunned" in any way.
 
Last edited:
Here's video of a Yamaha YAS-23 in the hands of a professional. The YAS-23 was made throughout the 1980s. So, it predates the YAS-280 and YAS-275, but has very similar characteristics. I think this video should conclusively answer the question re. whether an entry-level Yamaha sax is good enough to use for a professional gig. For those who still doubt these horns could cut the mustard, prepare yourselves for a little shock:-

View: https://www.youtube.com/watch?v=EYu2f6rLXVY

Yamaha YAS and YTS 23s, 25s, 275s and 280s are real "wolves in sheep's clothing". They are capable of doing a lot more than many people would think, and really punch above their weight. That's why quite a few pros I know have one stashed away as a back-up horn.

Needless to say I'm a big fan of them because they are lots of fun to play. The key-action is lightning fast - if you set the springs right. Put the smallest breath of air into them and away they go - very responsive.
 
Last edited:

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,073
Messages
578,613
Members
8,133
Latest member
walthang
Back
Top Bottom