Miscellaneous Any Cubase users out there, or maybe I need some MIDI help?

MandyH

Sax-Mad fiend!
Messages
3,245
Location
The Malverns, Worcs
I'm after some help with setting up Cubase 6 Artist for my daughter for her AS level music.
We have got as far as recording voice via the built in microphone on the PC (I know this is not a good microphone, but...)
We are trying to connect her MIDI keyboard - Yamaha PSR37 - to the PC.
We have a USB -> 2x MIDI cable and interface.
So far, we don't seem to be able to get the PC to recognise the keyboard. I don't know if the problem is with the interface cable (it is made by CHORD, says it runs on XP, Vista and Mac, but we are running Windows 7 - 32 bit, however, the "plug and play" appears to find drivers and says it's all installed and running properly) or the keyboard - we've never used it as a MIDI interface, my sister passed it on to my daughter several years ago, and we don't have the user manual. I can't find all of the user manual online, just the first 30 pages, and the MIDI bit is on pages 32-38 or so.
Any help gratefully received
 
I'm after some help with setting up Cubase 6 Artist for my daughter for her AS level music.

We have got as far as recording voice via the built in microphone on the PC (I know this is not a good microphone, but...)

We are trying to connect her MIDI keyboard - Yamaha PSR37 - to the PC.
We have a USB -> 2x MIDI cable and interface.

So far, we don't seem to be able to get the PC to recognise the keyboard. I don't know if the problem is with the interface cable (it is made by CHORD, says it runs on XP, Vista and Mac, but we are running Windows 7 - 32 bit, however, the "plug and play" appears to find drivers and says it's all installed and running properly) or the keyboard - we've never used it as a MIDI interface, my sister passed it on to my daughter several years ago, and we don't have the user manual. I can't find all of the user manual online, just the first 30 pages, and the MIDI bit is on pages 32-38 or so.

Any help gratefully received

I have found Part1 and Part2 of the manual you refer to in PDF format ... 51 pages in all 🙂

Part1 = 30 pages
Part2 = 21 pages

If you want them - I can email them over Mandy ...
 
Yamah keyboard manual ...

Email sent: Takes a little while to get the 2 files ...

I have Zipped them with Winrar ...

Let me know if you don't have something to UnZip them ... 🙂
 
I'm after some help with setting up Cubase 6 Artist for my daughter for her AS level music.
We have got as far as recording voice via the built in microphone on the PC (I know this is not a good microphone, but...)
We are trying to connect her MIDI keyboard - Yamaha PSR37 - to the PC.
We have a USB -> 2x MIDI cable and interface.
So far, we don't seem to be able to get the PC to recognise the keyboard. I don't know if the problem is with the interface cable (it is made by CHORD, says it runs on XP, Vista and Mac, but we are running Windows 7 - 32 bit, however, the "plug and play" appears to find drivers and says it's all installed and running properly) or the keyboard - we've never used it as a MIDI interface, my sister passed it on to my daughter several years ago, and we don't have the user manual. I can't find all of the user manual online, just the first 30 pages, and the MIDI bit is on pages 32-38 or so.
Any help gratefully received

Look in the midi section of Cubase 6 Artist to see if the yamaha PSR37 keyboard is listed. I don't think this keyboard is multi trimble so would only have midi through ports.:w00t: :w00t:

Teebones (Tony):mrcool
 
Thanks TeeBones, sadly this keyboard is not listed, maybe because of its age? it was produced in 1989.
SunRay has sent me the critical second half of the user manual, and it contains info on setting up the keyboard as a controller - it maybe just what I need... I'm hoping so. I'll give it a go later, but I have "domestic stuff" to do first! Yesterday at 6:00pm, my daughter said "we've been on this since 09:30am" and she was right, a whole day "wasted". I had meant to do so much...and my poor Sax didn't get a look in either :crying:
 
Hmmm... I'm beginning to think the problem may lie with the age of the keyboard :crying:
As a test, I've been to that high street catalogue shop and bought a "cheap" Casio keyboard with USB connection. It worked immediately. (I could take the keyboard back now! :shocked: )
Now admittedly, this was USB A to USB B connection, so no MIDI cables involved. However at least I have established that what we are doing in Cubase is right.

My other half found some software to control the Yamaha keyboard, so we know its MIDI IN is working, but we have yet to find any simple software to establish if the MIDI OUT of the Yamaha works.

That said, the green light on the USB-MIDI interface cable blinks everytime a key is drepressed on the Yamaha, so it's outputting something.

Still scratching heads... must go and play my sax :sax:
 
Hello Mandy,

What you need to do is open a midi track in Cubase and number the track (say track 1), you then need to set this track's input to your keyboard, or maybe you can use input as omni (I am not sure about this assignment in Cubase).

Using the keyboard as a controller will not let you use the keyboard's internal sounds. You then need to look in cubase for a soft synth - they are usually called VST's. Insert your chosen VST into the project. You then set the midi track output to the VST. Open the VST and choose a sound that you want to use and set it to track 1. The soft synth will output your music as audio, so you may need to open an audio track in Cubase to accommodate this.

I hope this is of some help.

Best wishes,

Albert
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,074
Messages
578,646
Members
8,134
Latest member
banjo
Back
Top Bottom