Mouthpieces Vintage M.C. Gregory Alto mouthpiece visual comparison (Model A & Master)

Saxlicker

Well-Known Member
Messages
2,526
Location
Breakfast room since '06 UK
Of course there is much information on and linked in Theo Wannes mouthpiece museum about most vintage Manufacturers and MC Gregory is there too. I have gleaned some of the knowledge made public on that website in this post.Thank You Theo for the work you do.
But here is a visual comparison of 2 Models of certain era's.
If we take for granted that both pieces may have had some attention but not to an extent that detracts from the original design then hopefully the observations between each piece stand.

- First of all the Logos allow easy identification between each model.
- The Model A - also has Rico Products LTD Distribution which came about as M.C. Gregory was employed by them and they helped with this mouthpiece venture. The serial number is on the shank under the table.
- The Master - of this particular era had a serial number at the bottom of the barrel, I believe serial numbers were later dropped.
- The rubber looks and feels the same to the naked eye and is renowned to be the same.
-The banded shank ring are very similar which changed in later Master models so along with the serial number those things making this a fairly early Master model.
-The tip shape is different but I can only speculate on whether these are design changes or due to possible after market work. It's different enough for me (whilst there is clearly not much if any work on the Model A to believe there is a design change.

IMG_6349 copy.jpg



There are some telltale signs throughout that the Master was Strengthened by the use or preservation of more rubber in the final product.

The amount of material on the Master thicker than on the Model A is....
- On the shank but the internal diameter is very similar on the cork.
- Inside, the table thickness.
- It is also said that the reputedly thin beak on the Model A has also been made thicker and that seems likely although I can't get a photo to show this and dont have and callipers handy to verify it.

IMG_6351 copy.jpg


IMG_6356 copy.jpg



The comparison is made between the
- Model A being a 5A-16
- Master being a 4A-18 (cleaned up to a 5)
According to Theo's information there is little change between all 3 sizes but I believe the master (in the same way as a small and medium chamber on a Meyer) has an effect on the amount low frequencies in the inherent sound.
Both have rounded walls that radius into the floor between the chamber and baffle. There is nothing that my photography can do to help illustrate that they are similar but not necessarily the same. As a point of interest here the Morgan DRY MARTINI 4-18 has a much flatter floor with a tighter radius intersecting the rounded walls.

The windows are similar, the Master has fatter rails, you can see some telltale signs of the original table milling so the work appears very minimal.
The Master may have a slightly higher baffle.

IMG_6352 copy.jpg


Overall these pieces retain an inherently Desmond Vibe.
I'm sure that is possible with a lot of other mouthpieces by ingesting the players sound and practising but it's a kick start without a doubt if you are after that sound.
This is point that many will dismiss as mythical or nonsense but I emphasise, if you are going for the sound its the designed tool for the zone.
 
Last edited:

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,571
Members
8,133
Latest member
walthang
Back
Top Bottom