Pledge

rs2sensen

Member
Messages
254
Wow! I just tried a tip I've seen on a few different websites about polishing a saxophone with pledge wood/furniture polish, and I'm amazed. I used the "Orange" smelling pledge, and tested it on my soprano first. The sax is very shiny, and doesn't fingerprint as much as I've noticed with other polishes intended for saxophones. I think I'm willing to try this one on the Selmer too (my soprano is the testing grounds for new saxophone tips/ideas/tricks, etc.).
 
Ideal stuff, Ive used it for a whie now on lacquered instrumnets particularly tubas and euphoinums etc.

A tip :

spray the polish onto the cloth rather than the instrument thatway there's less chance of accidently getting some of the polish onto the pads.
 
I use it too. Same method as Griff.

Works well on silver/gold finishes.

Sometimes makes me nervous the sax will 'slip' through my hands. 8)

PS: don't have to worry about other websites rs2sensen 😉

Griff previously had it here:-
http://www.breakfastroom.co.uk/index.cgi?fid=17&topic_id=1142819950&page=1
 
At 7:10:32 PM 07/05/06, griff136 wrote:

another good polish used sparingly is the car wax "Mer"

I know the bloke that makes Mer, I have a bucket load of the stuff. Is it not very slightly abrasive Griff?
 
At 5:04:00 PM 07/05/06, Ken wrote:
Sometimes makes me nervous the sax will 'slip' through my hands. 8)
PS: don't have to worry about other websites rs2sensen 😉
Griff previously had it here:-
http://www.breakfastroom.co.uk/index.cgi?fid=17&topic_id=1142819950&page=1

Ha, sad that I forgot about that, considering I posted in the thread too! I've also seen it on Steve Goodson's website, and a couple other places.

I know the bloke that makes Mer, I have a bucket load of the stuff. Is it not very slightly abrasive Griff?

I get a little worried when using abrasives, even slight ones, on lacquer. They can take the clear coat off and leave the horn open to the elements. However, this might be looking into for plated instruments, or nickel-plated keys.

I did notice that some instrument polish I bought when I was in Oregon (I forget what brand) smelled and looked like car wax. I'm sure it was less abrasive, but the similarity was very obvious.

Ha, here I am...its 80 degrees outside, perfectly sunny weather, and I'm inside playing with my sax!
 
At 7:31:51 PM 07/05/06, rs2sensen wrote:

I get a little worried when using abrasives, even slight ones, on lacquer. They can take the clear coat off and leave the horn open to the elements. However, this might be looking into for plated instruments, or nickel-plated keys.

I did notice that some instrument polish I bought when I was in Oregon (I forget what brand) smelled and looked like car wax. I'm sure it was less abrasive, but the similarity was very obvious.

Ha, here I am...its 80 degrees outside, perfectly sunny weather, and I'm inside playing with my sax!

Yes abrasives are a definate no, no on laquered instruments, that's why I was asking Griff. Suppose it's ok (occassionally) to bring a shine to a plain brass instrument.

Carnuba wax is suppossed to be pure and unrefined (I think), often used for auto and quiet expensive.

Sunny but rain on the way here 🙁
 
It is v slightly abrasive but its used on cars which are painted with what is basically either cellulose or acrylic paint (in most cases) most lacquers are either cellulose or acrylic.

I have even used T cut on lacquered bells to remove minor surface scratching

Note is did post that I use it sparingly.
 
On Pete's web site, he recommends an e-cloth. I've just bought some and used it for the first time tonight and I have to say, it works realy well on a lacquered finish without any polish etc. They are meant to be used either dry or with water. I tried it dry and my sax has come up better than it was new....
 
Yes, I first tried after my wife bought some for the house - they are very environmentally friendly for mopping up as they really do work with just water or dry - no cleaning products. I guess maybe they are a bit like the cloths for specatcle cleaning or monitor cleaning.
 
Hi Griff,
I know that Emilio Lyons among a few other techs has recommend Pledge as a polish for some years now. As a tech yourself, have you seen any abnormal accumulation of "crud" as a result of using this on the horn's surface over time, especially around the key-work/springs/etc?
Personally I loath introducing any such coating, however sparse, on my horns for that very reason.
Cheers.
 
Hi Michael,

When I give a lacquered sax a service - strip down, clean inside and out etc I use pledge or similar to po;ish the body and keys before I assemble it.

I dont advocate using it regularly on instruments and recommend my customers use a microcloth - like the cloths that are supplied with the new Jupiter saxes - they clean lacquer well with just a wipeover.

I havent experienced any build up of crud/wax other than the normal build up found on most saxes that have not been cleaned.
 
I dont advocate using it regularly on instruments and recommend my customers use a microcloth - like the cloths that are supplied with the new Jupiter saxes - they clean lacquer well with just a wipeover.

Having just bought one of these, I can say the included cloth does the job very well, albit it does get fairly dirty after some wiping.

Anyone have an idea where I could get a hold of e-cloth abroad?
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,069
Messages
578,510
Members
8,131
Latest member
Jef B
Back
Top Bottom