MIDI to PC

losaavedra

Member
Messages
310
Location
Rojales, Spain
I recently got hold of one of those USB plug (at one end) and MIDI IN and OUT plugs (at the other end) cable connectors that in the middle has a small unit with three lights on it ... one for power (which lights up) and one for 'IN' and one for 'OUT' which are intended to light when the thing senses a signal. The blurb that came with it says that just plugging it into a PC will automatically install the driver. Anyway, when I strike a key on my keyboard the 'IN' light illuminates briefly so my assumption is that the MIDI note signal is reaching the box in the middle of the cable. But try as I like I haven't got the PC end to recognize anything yet, or have the keyboard spring into tuneful life by anything coming out of the PC. The PC is running Windows XP with Service Pack 2. There is now a Service Pack 3, equally huge, that I tried to install twice last night but each time everything locked up about halfway through and the updates were duly backed out by the installation program. Trying SP3 was just on the off chance that Mr Gates has fixed something to do with MIDI drivers!
Maybe someone has one of these MIDI connectors and can shed a bit of light on what to try next. Life was so much simpler when I used to do this kind of stuff with a beaten up old Atari ST520!!!
 
You don't mention any software running on the PC. I believe it is necessary to have some kind of software running to interpret the MIDI ins and send them back to the Out, there's no "default" way of making sound. Your keyboard audio outputs need to be connected to an audio amplifier as well of course.
 
Thanks Mike ... the keyboard is an old Casio CT-670 with its own amp and speakers. The self-installing driver is 'registered' in XP as a composite USB device (MIDI Cable). If I load a MIDI track into (say) Band-In-A-Box, or some other MIDI playing software, I would think that, assuming I can 'point' said software at the USB device for MIDI IN and MIDI OUT, I should be able to record via the IN from the Casio and play back via the OUT to the Casio. Normally this sort of thing just 'happens' (but isn't in my case!) ... anyway I'll persevere. Thanks again.
 
Band in a Box isn't the right software for recording and playing MIDI. There are many suitable programs available free, cheaply or expensively. Anvil Studio is well thought of. www.anvilstudio.com, and as it's a free download will get you started.
 
Assuming the USB MIDI device has installed correctly, have you checked:

Control Panel - Sounds and Audio Devices - Audio tab - MIDI music playback - Default Device drop down menu and select name of your new device?
 
Hi sassysax,
Looking at "Control Panel - Sounds and Audio Devices - Audio tab - MIDI music playback - Default Device" (which I have many times!) it says "Microsoft GS Wavetable SW Synth" and offers no alternative options on the pull down menu. The device I've got (an HU-A602) says it is 'self installing' and "My Computer, View System Information, System Properties, Hardware, Device Manager, Universal Serial Bus Controllers, USB Composite Device, Properties, Location" reads: Location 0(USB Midi Cable) and "Status" reads: "This Device Is Working Correctly".
Should I get this adaptor to work then I'm just interested in getting note information into a MIDI file via my old Casio keyboard as the computer synths will make a far more melodious job of playing stuff back. Poking notes in via a mouse pointer on a screen keyboard I find very hit 'n miss (mostly miss!) and using my old Casio would be heaps quicker.
My suspicion is that there's something either in the Registry or an .ini file that needs a tweak to cause the HU-A602 to become an option one can actually switch to. I'll probably pursue that line of investigation today ... if I can work up sufficient courage!

John,
Have now installed Anvil ... looks very good despite not recognising the USB/MIDI connect (yet!). Thanks.

Later: The HU-A602 (Chinese 'copy' ... but needless to say very cheap and a bit skimpy on any kind of support!) looks much the same externally as the Yamaha UX16 and tries to do exactly the same sort of thing. Have thus now got hold of the UX16 drivers (and user manual) and will try that course of action. May work ... who knows. Have finally decided I hate computers despite a 35-year career working with the darned things! Gave up on the Registry investigation ... pouring through hundreds of lines of arcane hexadecimal stuff isn't my idea of a pleasant Sunday afternoon!
 
I'm afraid I can only echo what sassysax says. It looks like the device hasn't installed properly to me, but I don't know enough about the internal workings of Windows to be sure. Has Anvil Studio found it?
 
Finally a result ... moved the whole shebang across from the desktop 'house' machine (where the USB/MIDI gadget still isn't recognised) to the laptop ... and everything worked first time both for MIDI in and out from and to the keyboard in the case of Anvil and B-I-A-B. Thanks for the support though ... I'll take my time now sorting out the house box ... at least I can now feed MIDI note info in on something!
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,063
Messages
578,429
Members
8,129
Latest member
Bartman
Back
Top Bottom