Lubrication

impulse

Member
Messages
109
Could I have some input please on how often you folks are lubricating your saxes. I confess to only having libricated mine once since buying it (it`s six months old). I play about an hour most days. The Yamaha book says once or twice a month, but this seems a bit excessive. Sewing machine oil OK? Russ
 
Hi Russ, I do mine about once a month, and I play on average an hour or so a day. I use automatic transmission fluid (ATF) which I also use for lubricating bearings at work - I fix cashpoint machines. ATF is a very good lubricant, plus I believe it's non-corrosive. And it's cheap!!

Cheers, Bob
 
Good one Bob. Yes I can see how cheap it is for you!. However assuming transmission fluid costs say $10 /litre I worked out 4drops will cost me 0.2 of a cent /month. Maybe, yes, perhaps I can run to that! Russ
 
Bob Green wrote:

I use automatic transmission fluid (ATF) which I also use for lubricating bearings at work - I fix cashpoint machines. ATF is a very good lubricant, plus I believe it's non-corrosive. And it's cheap!!

Cheers, Bob

Hi Bob,

I remember you mentioning ATF in previous threads. Now I DON'T know anything definitive, but I wondered because some of my car workshop manuals have had mention to keep ATF away from paint and to quickly wipe any spillage on paint (a bit like brake fluid warnings, but not quiet so severe).

OK a sax isn't a car, but my wondering led to any possible effect on a lacquered sax, so I posed the question to an old friend from the Esso laboratory at Hythe. Once again "I" don't know, but the response I got was... ATF's vary by manufacture/brand in there composition, however do try to keep paint/lacquer contact to a minimum as it will soften/degrade these finishes with repeated/prolonged contact, eventually compromising the paints/lacquers bond to the metal and causing discoloration in some finishes. This info is from a chemist/technician that used to analyse Esso's lubricants etc.

Again, I don't know enough about ATF (petrol and diesel I do, but that's another topic), so it is just food for thought... wouldn't want the lacquer around the sax posts deteriorating or peeling off.

Ken.
 
http://www.shwoodwind.co.uk/HandyHints/oilaction.htm

another great how-too from Steven Howard Woodwind. It goes through what you should use, just where to oil, everything. There's lots of other great stuff on his site too. Oli
 
Rogerb wrote:
What about a large hypodermic needle (preferably 'blunted'!) ?

I tried this many years ago. If hypodrermics still have a rubber piston, the oil will very quickly cause it to disintegrate
 
Pete Thomas wrote:
Rogerb wrote:
What about a large hypodermic needle (preferably 'blunted'!) ?

I tried this many years ago. If hypodrermics still have a rubber piston, the oil will very quickly cause it to disintegrate

Don't know how many years you mean Pete, but the newer (plastic) hypo's have a nylon plunger that is a 'little' more resistant to oil. I've used them to get oil into tape machine bearing and latterly on the sax. They do seem to be a bit uncontrollable and squirt more than you want at times.
 
"Having chosen our lubricant we need to be able to apply it. I oil instruments every day of my working life - so I need a system that can deliver a suitable amount of oil as quickly and as cleanly as possible. For this I use a glass syringe and a large hypodermic needle ( with the tip squared off! Unmodified hypodermic needles are extremely dangerous!! ) It's ideal for the job, but glass syringes are expensive and fragile - and difficult to purchase!! ( There are issues such as drug abuse that makes their use a little suspect ). Plastic syringes are unsuitable as the oil degrades the rubber plunger - and as the action of these syringes is a little unpredictable you can end up squirting a LOT of oil over your keys. Some hobby shops sell little plastic 'oilers' - little flexible plastic bottles with a thin hollow tube sticking out of the bottle. These are ideal.

I have been informed that Yamaha key oil comes in little bottles with just such an oiling tube - so full marks there!! If you're a bit of a cheapskate ( and why not?? ) you can simply use an old jam jar lid and a large sewing needle."

Quote from the article on oiling on SHwoodwind.co.uk
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,069
Messages
578,510
Members
8,131
Latest member
Jef B
Back
Top Bottom