Mouthpieces Is it a Bb tenor mouthpiece?

thomsax

Well-Known Member
Messages
7,428
Location
Sweden
I have a nice brass (been plated) tenor mouthpiece that the I.D. of the bore is too small for most tenor necks. The I.D. of the mouthpiece bore is c 16 mm. I mesured the O.D. of some necks (not the cork):
  • Keilwerth 1963; 14 mm
  • Martin Handcraft (Committee) 1938; 15 mm
  • The Martin Magna Tenor 1959; 15 mm
  • Keilwerth New King 1968; 16 mm
Is it a Bb tenor mpc? Is it possible to make the bore of the mpc bigger (the wall of the bore "shank part" is just 1 mm)? Work on the necks?

I.D. of the bore.
czmpci.d..JPG
O.D. of a Keilwerth New King. I use to play a Berg Larsen ss on this sax that have I.D. ca 17mm. Eveni if sand down the cork I will have difficulties to use the old CZ made mouthpiece.
nkneckod.JPG
 
I had a metal PPT that was i.d. 16mm, which was inconveniently tight on the cork compared to my other tenor mouthpieces

In that instance, in 2015, I asked Morgan Fry, who had made the piece, to sand it out to 17mm, which he said was the more modern diameter

What is @Phil's preferred i.d. for tenor pieces?
 
Vote:
Upvote 0
Among my mpc's the smallest inside diameter of a tenor mpc is 15.8 mm. The text on the mpc is: Thibouville Freres Ivry (EURE). The French tenor with this mouthpiece has a thin (0.5mm) cork on the neck. The outside diameter of the cork was 15.7_15.8mm.
 
Last edited:
Vote:
Upvote 0
I got this mouthpiece when I bought a Kohlert tenor from the 30's. The Kohlert had a microtuner on the neck. I traded the Kohlert for a Dolnet Bel Air so I can't try the mouthpiece on Kohlert. The Keilwerth -63 neck is ok if I sand down the cork. But I cant adjust (pitch) so much on my Martin. And I can just forget to use it on the New King.

Did/does High Pitch and Low Pitch saxes share the same mouthpieces?
 
Vote:
Upvote 0

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,074
Messages
578,636
Members
8,134
Latest member
banjo
Back
Top Bottom