Getting Professional Sounding Recordings

mischamouse

Member
Messages
9
Hi all,

I need a find a way to get my recordings to be higher quality than what they currently are. At the moment they sometimes sound too muddy and quiet.

I score everything using Sibelius and generally import it or play it into cubase. I have Vienna Instruments SE, BFD Garritan Personal Orchestra. I don't have any mixing or mastering plugins other than what comes with cubase but I do have an external mackie mixer and a couple of reverb units. Money is tight at the moment and I can't afford to go on an in house course. I was thinking about a distance learning production course to solve the problem, or is it advisable to present somebody with a midi and audio project that contains all the samples etc and ask them to mix it down?

Can anybody recommend any books / dvds on production or courses. Or does anybody know anyone that will take a Sibelius score or a cubase file and turn it into a decent recording.

many thanks

mischa
 
I wish I knew an answer to your question, unfortunately I don't know of any music production courses that I can recommend (apart maybe Leeds Colege of Music but that's another degree programme)

It might be best to look for a short course, evening classes or something. Ideally then you would learn but also meet up with other people, some might be very good at production and happy to help with producing your music. You could spend money on a professional studio, but for what you are doing it can be mixed in a home/project studio. The most important part of it is the MIDI programming, unless you plan on adding real instruments (always a good idea)

I'm sure some others here may have some other advice, meanwhile I'll try to think of some other resources.
 
thanks Pete, I've been looking at short courses and most of them cater for dance music. Since I mainly do orchestral I'm concerned that will miss out on a lot of techniques and tricks and that's why I would prefer to look at ones that have been recommended. You're absolutely right a lot is down to midi programming. This is one area that I am getting better at but I'm finding it very time consuming trying to get the balance between which sample, cc7 and everything else. This is very much trial and error but if you have any good tricks it would be very much appreciated. I can never get brass to sound right, always too tinny and I know that people have achieved great sounding brass through VI SE.

Do convoluted reverb plugins make all the difference? They are rather expensive and resource hungry. I don't want to fall into the trap of a bad engineer always blames his tools 🙂

mischa
 
I've always found that the key to brass is with the 'modulation' controller. you can vary this to get decent effects.

Also heavy use of the 'expression' controller can really help to make it feel more 'real' instead of robotic.

Have you tried making the scale really large and putting the quantise to it's smallest amount? You can get very fine detail this way for note beginnings end endings, you don't want to use it all the time with everything because that's a lot of data! But it's good to use on the opening and beginnings of sections within the structure.

As for getting the volumes right, I set everything to main volume 100 and have a standard input of 80 which I relate to 'mf' and move in sets of 20 for dynamic markings. You then have 20 different levels between each dynamic marking to express the lines and give a realistic feel.

Brass instruments have a lot of 'attack' so use the expression controller to emphasise the beginning of the note with say 6 or 7 more. If it's staccato playing use 9-10 say . 2-4 if legato and if slurred the same volume level.

I find understanding how the instruments work will give you lots of ideas on how to make the midi sound better.

For example string instruments change a lot over the length of a bow because of the tension changes in the bow. they actually have a medium attack, get slightly louder towards the middle of the bow, then fade out again towards the far end of the bow. You also have a weaker attack and volume level on an up bow as down bowing is naturally a stronger movement.
Playing at the 'heel' gives a thinner timbre, more attack and quite a lot of crescendo.

The university of Surrey do a digital composing degree course, which personally I think is rubbish, but they have a 'tonmeisters' course which is brilliant. They may do evening classes there or something similar. Alternatively music technology A-level covers midi arranging, composing as well as general recording and basic music analysis. you could do that somewhere part time or something.

Maybe there is a more specific course that offers a qualification afterwards as well?
 
Thanks Linky I've been playing about with expression and modulation a lot but obviously not getting it right. I've never tried enlarging the quantise to maximum, sounds like a good idea and will give it a whirl. As for courses, I'll continue my investigation and thanks for the info about Surrey.
 
Does anyone know about this place. The London Academy of Film and TV

http://www.media-courses.com/coursepages/supercourse.asp?id=98

it's one thing having a decent website, it's another having a decent course. I'm a bit dubious over the fact that no prior music knowledge is necessary especially since I've studied piano for 20yrs and classical composition for 4yrs. Although I use cubase and Sibelius I can't see too much of a problem learning on logic. I presume the techniques are all the same.

Anyone have any thoughts.

mischa
 
Here's a diagram explaining what I mean. Hopefully it makes it clearer.

Click on it for a decent view.
my.php
 
that makes perfect sense thanks. Linky have u ever used VI and if so how do you blend going from a harsh attack to sustain. I've been trying with sfz samples and using crossfading to a sus or leg sample and I've tried it with altering the attack of a sus sample and can't seem to get it right always sounds too synthetic.
 
Sorry, can't help you there I've never had to do any of that.

I've only ever worked in Cubase SX3, 4, Le and another old version I can't remember. I find SX3 to be much much better than 4 and the best by far.
 
Hiya,

Firstly, to get a mix-down and master to sound right a lot of the punch is created by positioning the different parts of the "band" at different places in the mix to give a feeling of depth, and create space..... a particularly good magazine I use to pick up information is Music Tech, this covers many subjects from recording live to EQ and compression, and gives some great starting points for further experimentation.

The dance music courses may not be in the right genre, but they do teach sound production theory which is great across any genre.

Music production is like playing a musical instrument at a high level, it requires practice and a certain ear. Additionally, the mic and acoustics of the room you use when you "play into cubase" will have a huge effect. Compression will make the mix more punchy, but you need to create space with pan and eq, or the various instruments will simply try and stomp on each other, giving you a loud but muddy mix.

There are many reasons that a mix can sound muddy and lack lustre, as mentioned in other threads, 1 problem can mask another and 90% of the sound degradation will be caused by 10% of your setup.

I'm sorry I can't help more, but it's difficult to tell how to make something sound better without listening to it.

Hope this is helpful to you

Tony.

EDIT: I forgot to say Berklee Music College in the USA http://www.berklee.edu/ does online training, I've no direct experience, but rumour has it that they're not bad.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,063
Messages
578,429
Members
8,129
Latest member
Bartman
Back
Top Bottom