Miscellaneous DIY/ Building question...

Fraser Jarvis

Senior Member
Messages
1,794
OK, I know it's probably not the right place for a question like this but here goes anyway.

I'm in the early stages of constructing my new office / studio, problem is with laying the floor joists i had to cut some wood from the bottom to allow for the uneven concrete underneath, now i have a very springy set of joists slightly raised from the original floor, someone suggested i pack out the gap with plastic window packers? I'm not sure that would work, i thought of using tiles but over time wont these crumble?
So if there are any building types out there I'm open to suggestions, thanks...
 

Attachments

  • DSCF3063.webp
    DSCF3063.webp
    11.7 KB · : 83
If the gap isn't too big (less than half an inch) I would just use some roofing felt to ensure support every couple of feet. If the gap is to big, I would go for tiles. No real reason why they should crumble.
 
G'day Fraser,

Second go at replying, (lost the last one cause my internet connection dropped off)

You really need to anchor down the Joists if they are spanning a large distance, You don't mention how long the span is, nor the size or spacing of the joists.
I would use some of that builders glue (in big tubes, brand names on this side of the world are "No More Nails" etc. Make sure it will bond Concrete to wood. If you are getting movement in the gap, I'd dyna bolt thickish brackets to the conc floor and screw also to the joists I hope there is no dampness in the existing floor and you have used dry joist which are suitable for the job in hand. If possible provide some ventilation to the underfloor especially if its damp...

Ask plenty of questions at your local Builders supply place, from someone (several of em) who looks like they would know.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,076
Messages
578,675
Members
8,134
Latest member
banjo
Back
Top Bottom